Sale!

Leviton Decora® PIR Occupancy Sensor Switch

$41.99 $38.99

Leviton’s Decora® PIR Occupancy Sensor Switch uses infrared tech to detect a space for occupancy and adjust lights accordingly.

  • 10A Relay, 120/277 VAC
  • No-neutral wire required
  • Field of view: 2100 sq ft, 180°

 

SKU: ODS10-IDW Category:

Description

Leviton’s 1754-W ODS10-IDW uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.

  • ODS10-IDW fits in standard wallbox and replaces single-pole wall switch. Gangable with other units
  • Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora styling complements any interior; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices
  • 180° field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas
  • Convenient pushbutton provides manual-ON/OFF light switching at any time
  • Two dual element PIR sensors used to widen detection range
  • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected
  • Vandal resistant PIR lens
  • Horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required
  • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings
  • To comply with T24, red LED indicator light flashes on ODS10-IDW when sensor detects motion to verify detection is active
  • Time Delay adjustment for delayed-OFF time set-tings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings
  • Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
  • Light sensor enables the load hold-OFF feature once level has been set
  • Vacancy confirmation – when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON
  • False detection circuitry
  • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
  • One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts
  • Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
  • Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service
  • No neutral design is optional for retrofit applications
  • Visit your local Cardello Electrical Counter to purchase!

    Additional information

    Amperage

    10

    Brand

    Leviton

    Finish

    White

    Grounding

    Non-Grounding

    Mfr. Warranty

    2-Year Limited

    Operation

    Single Pole

    Standards

    UL/CSA

    Voltage

    120