Description
Leviton’s 1754-W ODS10-IDW uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
ODS10-IDW fits in standard wallbox and replaces single-pole wall switch. Gangable with other units
Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora styling complements any interior; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices
180° field-of-view provides approximately 2100 square feet of coverage suitable for small offices, conference rooms, classrooms, lounges and a variety of commercial areas
Convenient pushbutton provides manual-ON/OFF light switching at any time
Two dual element PIR sensors used to widen detection range
Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected
Vandal resistant PIR lens
Horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens. No masking tape required
Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings
To comply with T24, red LED indicator light flashes on ODS10-IDW when sensor detects motion to verify detection is active
Time Delay adjustment for delayed-OFF time set-tings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings
Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
Light sensor enables the load hold-OFF feature once level has been set
Vacancy confirmation – when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON
False detection circuitry
Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts
Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
Exclusive Leviton H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service
No neutral design is optional for retrofit applications
Visit your local Cardello Electrical Counter to purchase!